How to Setup Netgear AC1200 Wifi Range Extender ?

Netgear AC1200 Setup Providing one of the fastest speeds and a fixed and good Internet connection with 1200 Mbps.Wifi speed, 880MHz processor, and synchronic dual band are all features. It will also provide delay-free HD video streaming and multi-player gaming for up to 20 devices and a thousand square feet of coverage.

Simultaneous dual band networks will have two frequency bands, 2.4GHz and 5GHz, which reduces WIFI intervention and increases bandwidth.

Compatible with current and future WIFI routers or modems.

Follow the given Steps for Netgear AC1200 Setup

• 1.Install Netgear AC1200 on a computer or mobile device.
• 2.Ensure that the EX6120 is plugged in close to the main modem or router.
• 3.As soon as the WiFi repeater has a solid green light.
• 4.Now look for the “NETGEAR_Ext” network in the WiFi connection manager on your laptop 5.or smartphone.
• 6.Open a web browser while connected to an AC1200 network.
• 7.Visit mywifiext.net right away. It will display the NETGEAR installation assistant.
• 8.To connect your Netgear EX6120 to the current WiFi network, simply follow the on-screen instructions.
• 9.once the AC1200 configuration is finished. Place the repeater where there is a weak Wi-Fi signal after unplugging it.

Feel free to contact our certified expert if you run into any issues during Netgear AC1200 Setup. Our experts are available around-the-clock to help you with the wireless repeater.

How to Setup Netgear AC1200 Extender Via WPS?

We can connect to a secure WiFi network using Netgear AC1200 Wi-Fi Protected Setup (WPS) without having to enter the network name or password.

Important:The WEP network security will not be supported by WPS.

Follow the given steps for Netgear AC1200 Setup:

1. Press and hold the Netgear EX6120 WPS button on your extender until the WPS LED starts to blink.
2. In less than two minutes, press the WPS button on the router or access point.
3. Don’t unplug or turn off the booster while the WPS setup led light is blinking.
4. You will notice that the power, router, and WPS leds are all solidly lit up green if the connection between your router and AC1200 extender is successful.
5. The extender should now be unplugged and moved to a location with a very weak WiFi signal.
6. In order to connect, find the EXT network on your computer or mobile device.

Netgear AC1200 Setup via manual Process

To manually set up a Netgear AC1200 router, follow these steps:

1. Using an Ethernet cable, join your modem to the router.
2. Connect your computer to one of the LAN ports on the router using another Ethernet cable.
3. Open a web browser and enter “192.168.1.250” into the address bar.
4. Enter “password” as the default password and “admin” as the default username.
5. Go to the “Internet” or “WAN” section and configure the Internet connection settings, 
6. Save the changes and restart the router.
7. Once the router has restarted, go to the “Wireless” section and set up the wireless network, including the network name (SSID) and password.
8. Save the changes and restart the router again.
9. Connect your devices to the wireless network and test the internet connection.

Note: These steps may vary slightly depending on the model and firmware version of your Netgear AC1200 router.

Feel free to contact our certified expert if you run into any issues during Netgear AC1200 Setup. Our experts are available around-the-clock to help you with the wireless repeater.

How to Update Firmware on my Netgear AC1200 Extender? 

Firmware update for a Netgear AC1200 extender refers to the process of downloading and installing new software onto the device in order to enhance its performance, fix any bugs, or add new features. It is important to keep the firmware updated to ensure that the extender is functioning optimally and that it is secure from any security vulnerabilities.

Read the following steps guven below to update firmware on Netgear AC1200 Extender

1. With the aid of an Ethernet cable, join the extender to your computer.
2. Access the Netgear extender login page by typing “mywifiext.net” in your web browser.
3. Use the extender’s default username and password to access the web interface.
4. Go to the “Firmware Update” section and check if there is a new firmware version available.
5. If there is, click on “Update” and follow the on-screen instructions to complete the process.